|
|
 |
 |
 |
MINITEST 700
I
ElektroPhysik
I
Model No MINITEST 700
For Non-destructive measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. The new MiniTest 700 series integrates digital signal processing for the first time inside the sensor of a coating thickness gauge. This technology goes beyond the limits of conventional analogue technology and a new benchma ...
|
|
 |
MiniTest 403 Thickness gauge
I
ElektroPhysik
I
Model No MiniTest 403
The MiniTest 403 is a straight forward ultrasonic thickness testing gauge housed in an all metal housing sealed with gaskets to make it weather proof. The sealed membrane keypad is impervious to moisture and oils. With a Measuring Range of 0.63 to 500 millimeters and a Resolution of 0.01 millimeters, the MiniTest 403 allows the user to select a quality tool that will meet or exceed their specific ...
|
|
 |
MiniTest Ultrasonic wall Thickness Gauge
I
ElektroPhysik
I
Model No MiniTest 406
The MiniTest Ultrasonic 406 is an extremely robust hand-held ultrasonic thickness gauge designed for non-destructive, quick and accurate measurements of wall thickness of steel and other metals as well as glass, ceramics, homogeneous plastics, etc. Measurements can be taken on flat as well as curved surfaces. The all metal construction, sealed membrane keypad and weather tight gaskets allow these ...
|
|
 |
COLORTEST
I
ElektroPhysik
I
Model No COLORTEST
Designed for high-precision color measurement, the versatile ColorTest works on the spectrophotometric principle which is by far the most advanced and precise color measurement method. Featuring a 45°/0° measuring geometry according to DIN 5033, the external probe illuminates the sample with a defined light source to measure spectrally the light remitted.
|
|
 |
GALVANOTEST
I
ElektroPhysik
I
Model No GALVANOTEST
The coulometric or anodic de-plating technique is used for measuring thethickness of electroplated coatings on virtually all substrates such as steel, non-ferrous metals or insulating material bases. Typical applications include: nickel on steel, zinc on steel, tin on copper, silver on copper or copper on epoxy.
|
|
 |
QUINTSONIC
I
ElektroPhysik
I
Model No QUINTSONIC
The new portable gauge was especially designed for non-destructive coating thickness measurement of paint, varnish, plastics and other insulation coatings applied on wood, plastics, glass, ceramics etc. as well as for polymer layers on metals.
|
|
 |
STRATOTEST 4100 C
I
ElektroPhysik
I
Model No STRATOTEST 4100 C
Refractory bricks undergo premature degradation through thermal cycling with a significant decrease in mechanical properties. Designed to measure the thickness of such bricks, the StratoTest 4100 C prooves to be a most useful tool to determine the state of lining in industrial furnaces, rotary kilns etc.
|
|
 |
POROTEST-7
I
ElektroPhysik
I
Model No POROTEST-7
Flaws in protective coatings such as pores, cracks and fissures, if undetected, may impair the corrosion resistance of a product. The PoroTest 7 by ElektroPhysik has been specifically designed for non-destructive porosity testing of such coatings, based on automatic test voltage control specific to the thickness of material to be tested and vice versa.
|
|
|
|
|
